PyroMania Paloma 36" Slate Outdoor Propane Gas Fire Pit Table
Hand-crafted from top-quality high-performance Glass Fiber Reinforced Concrete (GFRC) with 2 coats of clear sealer applied. GFRC is lighter compared to materials like marble and stone but provides the same level of durability while giving...
QUESTIONS? SPEAK WITH AN AGENT +307 4591340
Hand-crafted from top-quality high-performance Glass Fiber Reinforced Concrete (GFRC) with 2 coats of clear sealer applied. GFRC is lighter compared to materials like marble and stone but provides the same level of durability while giving a natural handcrafted look. On the other hand, due to the glass fibers mixed in the GFRC help to reinforce the concrete, it's stronger than MGO (Magnesium Oxide) and without paint in GFRC makes it more colorfast to withstand the outdoor elements. The sides feature a distinctive slate texture while the top has a sleek matte finish.
*Available in two fuel types (natural gas and propane) which are easily convertible.*
Features
- CSA certified
- Thermo-couple controlled 50,000 BTU burner
- Convenient Electronic Ignition
- Hand cast from high performance concrete (GFRC)
What's Included
- A 10-foot hose with a 3/8" flare fitting at the end for natural gas connection. Or a 10-foot hose with a standard connection for a propane tank.
- A weatherproof canvas cover
- Optional aluminum legs raise the table 3 inches off of the ground allowing plenty of ventilation for installation on composite decks
- Propane Tank Seat
Note: All fire pit media (pebbles or fire glass) will be sold separately
Specifications
| Model No. | PA-SL-LP |
| Series | Paloma |
| Fuel Type | Liquid Propane |
| Material | Fiberglass Reinforced Concrete |
| Finish | Slate |
| Ignition | 1.5v DC Battery |
| Burner Material | 304-Stainless Steel |
| Certification | CSA |
| Heat Output | 50,000 BTU |
| Burner pan size | 18" diameter, round |
| Burner ring size | 12" diameter, round |
| Width | 36" |
| Depth | 36" |
| Height | 15" |
| Height without legs | 12" |
| Table weight | 123 lbs. |
| Media weight | around 50 lbs. |
| Weight with rocks | 175 lbs. |
Warranty
LIMITED ONE YEAR WARRANTY
Pyromania Inc. extends the following warranty for PyroMania brand decorative gas appliances in the USA and Canada. Dealers and employees of Pyromania Inc. have no authority to make any warranty or authorize any remedies in addition to or inconsistent with the terms of this warranty. This warranty gives you specific legal rights. You may also have other rights that vary from state to state.
Pyromania Inc. warrants that this decorative gas appliance will be free from defects in material and workmanship for one year from its date of purchase. The warranty is subject to the conditions, exclusions and limitations described below.
This warranty applies only to the original owner of the product and is non-transferable. Pyromania Inc.’s obligation under this warranty does not extend to damages resulting from (1) assembly, operation or maintenance of the product not in accordance with the Owner’s Manual; (2) installation or use which does not comply with local building codes and ordinances; (3) shipping, improper handling, improper operation, abuse, misuse, accident or unworkmanlike repairs; (4) use of fuels other than those specified in the Owner’s Manual; (5) Installation or use of components not supplied with the product; and/or (6) modification of the product not authorized or approved by Pyromania Inc. This warranty is void if the product or any component has been removed, repaired or replaced before Pyromania Inc. has been given a reasonable opportunity to inspect the product.
This warranty is limited to the replacement or repair of defective components or workmanship and Pyromania Inc. may fully discharge its obligations under this warranty by repairing or replacing, at its discretion, the defective components under this warranty. The maximum amount recoverable under this warranty is limited to the purchase price of the product only and does not cover costs related to freight, removal, re-installation, etc. If Pyromania Inc. is unable to provide replacement or repair in an expedient and cost effective manner, Pyromania Inc. may discharge all obligations under this warranty by refunding the purchase price of the product.
This warranty applies only to appliances used for personal, family or household purposes and specifically excludes rental, community and commercial applications.
The original purchaser acknowledges and agrees that this product is a hand-made, hand-finished product and each piece is unique. Any samples provided are typical of texture, finish, color and individual characteristics but they should not be considered exact representations of the final product. There can be up to a 15% variation in color and texture from unit to unit. In addition, shape detail can vary as much as ¼” in size. The texture created by entrapped air ranges from smooth to randomly indented. Minor chipping, water staining and non-structural hairline cracks are also traditional characteristics of this product. As with natural stone, color will vary on individual orders and among individual pieces in the same order. As with natural stone, excessive heat exposure may cause discoloration. As this product ages, color may lighten or darken according to specific field or storage conditions such as humidity, temperature and exposure to sunlight.
TO OBTAIN SERVICE UNDER THIS WARRANTY, YOU MUST:
---------------------------------------------------------------------------------------------- This warranty certificate along with proof of purchase must be produced when making any claim. |
Documents & Files
Frequently Asked Questions
Safety, Product & General Questions
What is GFRC?It is glass fiber reinforced cement, which has a special formulation and casting method that allows it to be cast quite thin. It is both lightweight and strong. We use it so that our fire tables can easily be carried and installed on any patio surface including apartment balconies. It has a better ability to expand and contract then traditional concrete and much less likely to suffer from structural cracks, what makes it the ideal material for outdoor fire features. |
Can the propane tank be hidden inside of the fire table?No. Due to height restrictions, propane tanks cannot be hidden inside of Pyromania fire tables, but we have matching tank covers which are sold separately.. |
Is the burner flame adjustable?Yes, you can adjust the flame to the desired height with the control knob. |
Is assembly required?Yes, minimal assembly is required. The fire pebbles must be installed in the burner area and the gas line must be connected to the gas source. Please refer to the owner’s manual for the procedure. |
What safety standards are Pyromania fire tables certified to?All our residential and professional line fire tables are certified to CSA/ANSI standards. |
Do Pyromania fire tables come with a warranty?Our residential line has a 1-year limited warranty, and the professional line has a limited 2-year warranty. For more details about our warranties, please contact us. |
How many BTU are offered?Pyromania residential line models have a heat output of 50,000 BTU and the professional line models have a heat output of 60,000 BTU. The BTU output are the same for both propane and natural gas. We use a different sized orifice in each one to compensate for the difference in gas density. |
What is the burner made of? What materials are the fire pits made of?Our burners are made of 304 stainless steel and brass. The fire tables body are made of glass fiber reinforced cement (GFRC) material. |
Can I put a Pyromania fire table on a wood or synthetic deck?Yes, Pyromania fire tables have a heat shield incorporated underneath the burner pan and can be placed on any non-combustible surface. |
Can I put a fire table under a covered patio? What is the overhead clearance minimum?You can absolutely have a natural gas or propane fire table under a covered patio if the overhead height of the ceiling meets CSA requirements for distance from appliance. This is usually between 72 - 80 inches above the height of the tabletop and 48 inches in the sides and the back. Refer to the Pyromania owner’s manual for required minimum clearances. |
Do I need to allow for ventilation inside the fire tables?Yes, fresh air must be able to pass under the fire table to safeguard against residual gas accumulation. Failure to allow proper ventilation may cause a fire or explosion. If installing this fire table without the optional legs, it should be placed on a hard level surface that allows proper ventilation 3 | P a g e through the ½” gap incorporated into the bottom. If the installation method blocks the incorporated gap, then an alternative method for allowing ventilation would be required. Required minimum clearances (to combustible materials): Sides and back - 48 inches (122 cm). Top - 72 inches (183 cm). |
Can I keep my fire pit outside year-round? Do I need to cover my fire table?Yes, our GFRC fire tables are designed for all weather use and can be left outside year. However, we recommend that the supplied weather resistant cover is used to protected from the elements or if unused for extended periods. The cover also helps to keep debris out of the burner pan and prolong the life of the burner components. |
What can happen if a Pyromania fire table gets rained on?We always suggest using the supplied cover to protect the fire table from harsh weather conditions, but a little rain should not be too much trouble because Pyromania fire tables are made with all-weather materials and feature drainage holes to deter moisture damage and water pooling. |
Can Pyromania fire tables be used in windy areas?Storage of the fire table indoors is permissible only if the gas source is disconnected and gas cylinders are removed from the appliance. |
Can I store my fire table indoors?Gas fire tables typically do not do well in high wind areas. Too much wind interferes with the aesthetics that are usually desired from a fire pit. It also has the potential for cracking the concrete if the flame is blown onto the table surface for a prolonged period. This said, if you plan to install a gas or propane fire table in an area with consistent wind, we recommend using a glass wind guard. |
Are glass wind screens available?Yes, we offer tempered glass screens for most of our models. (Note that the glass is for screening wind only. It will get hot!) |
What type of connections are included with the propane fire tables?For propane fire tables, we preinstall a 10-foot propane hose with a pressure regulator and connector for 20-pound portable propane tanks. |
Where can I buy a propane tank?Propane tanks (cylinders) can be purchased at most of home improvement stores (i.e. Home Depot, Lowes), grocery stores, gas stations, etc. |
How long does a 20-pound propane tank last with a Pyromania fire table?With the flame set at maximum, our professional line fire tables should run for about 8 hours and the residential line tables should run for about 10 hours. |
What type of connections are included with the natural gas fire tables?For the natural gas fuel fire tables, we pre-install a 10- foot natural gas hose. It is equipped with a 3/8" (female) flare end connection. It is a standard gas connection and gas shut-off valves are available with the male connection. |
If my gas line is underground can be connected under the unit hiding the connection? Or does it have to be outside the table?We designed our fire tables with both types of installations in mind. If you have an underground gas line it can be connected 5 | P a g e inside the cavity of the fire table through the bottom. All Pyromania fire tables have a supply hose pre-installed and connected to a bulkhead connection which is discreetly located underneath the bottom side. The hose can be disconnected, and the bulkhead fitting can be removed from the body and relocated inside the fire table cavity. Then the hose can be reconnected to the bulkhead fitting on one end and connected to your gas line "stub-up" at the other end (refer to the spec drawing for the opening size at the bottom of the fire table). Once the table is set in position the hose and the old connection point will not be seen. |
Can I bury the supplied gas line underground?No. Do not bury the gas supply line supplied by the manufacturer underground. They are not approved or certified for underground use. |
Can I convert my fire table from NG to LP or vice versa?Yes, we offer conversion kits. All the conversions should be performed by a qualified service agency in accordance with the manufacturer’s instructions (Pyromania Inc.) and all applicable codes and requirements of the Authority Having Jurisdiction. The qualified service agency is responsible for the proper installation of this kit. Contact us for more information. |
Who should I call to install my fire table?You should call a certified gas fitter or a local gas supplier to connect the fire table to a gas supply line (natural gas or hard piped liquid propane). |
What is fire table media?This is what you use to fill your fire table burner area and give it the look that you desire. These can include lava rocks, tempered fire glass, fire pebbles, mixed media, and fire pit logs. If using fire glass, make sure that it is heat resistant for at least 1100 degrees. |
Is media included with the fire table?Yes, 44 lbs. of fire-resistant pebbles (2 bags - 22lbs each bag) are shipped with the fire table. |
What to do if the fire pebbles are cracking or splitting?This is a property of fire pebbles and may happen occasionally. It is due to heat and/or abrupt temperature changes. Do nothing. This is completely normal. |
How to arrange the fire pebbles on the fire table?Place the pebbles by hand. Do not dump the bag into the burner in order to prevent damage to the fire table, to prevent clogging the burner ports with dust and to prevent getting debris in the ignitor box. Only place enough pebbles to cover the top of the burner ring and pan by 1”. Do not cover the top of the ignitor box. Excessive material may impede gas flow, cause gas build-up, and potentially cause an explosion. |
How do I clean my fire table?For routine cleaning of the fire table, wipe down with a damp cloth or sponge and mild dish soap. Avoid using any other cleaners as they may contain chemicals that can cause discoloration. To remove stains, use a marble or granite stain remover available at a local home improvement or masonry supply store. Follow the application instructions provided by the stain remover manufacturer. |
Point Design's products
Order Confirmation:
As soon as you place your order, you will receive an order confirmation e-mail. This means that we have received your order in our system and pre-authorized your credit card for the purchase. As soon as we receive your order, we automatically reach out to our suppliers to confirm that it is in stock and available for immediate shipment. If your item is on backorder or unavailable, we will void the pre-authorization and reach out to you via e-mail. If your item(s) are available for immediate shipment (within 5 business days), we will process the charges and submit the order for shipment.
Order Shipment:
If your order is in stock and we process the charges to your credit card, it will ship within five business days from the date of your order. We will send you tracking information within 24 hours of your order leaving the warehouse to the e-mail address you provided when checking out. Accordingly, ETA for "Point Design" products is 5-12 days. If you do not receive tracking information from us within six business days of your order, feel free to follow up with us at sales@pointdsgn.com.
How can I cancel my order?
As long as your product has not been submitted for fulfillment by us, we can cancel the order as long as the notice was made within 24 hours. If you cancel the order within 24 hours, a 10% cancellation fee will be applied.
There will be no cancellation fee prior to the 24 hours! If your order has been shipped, we ask that you follow our return policy in order to get a full refund once you receive your product! This means we CAN NOT cancel your order it must be returned.
We often submit items for fulfillment within a few hours, so the faster you can let us know about the cancellation, the more likely we'll be able to do it.
____________________________
Brands
All shipping times are estimates and should not be taken as a guarantee. We make sure our vendors know of new orders to get orders shipped out as soon as possible. With that being said, if a customer decides to cancel an order due to a shipment not arriving in the estimated time frame, customer is responsible for all associated shipping charges, fees, warehouse storage costs, and any other fees associated with the order. Any customer that files a chargeback for delays in shipping will be held criminally liable for theft. No Exceptions Apply.
This tab offers delivery information for our bestselling brands:
The Outdoor Plus:
If your order is stock, the product will ship within 1-2 business days from the date of your order. We will send you the tracking information to the email address you provided at checking out within 24 hours of your order going out for delivery.
Most of The Outdoor Plus products are made to order/custom order. Accordingly, it is best to contact us on the green "chat" button at the bottom.
American Fyre Designs:
American Fyre Designs products are made to order and current manufacturing time is 2-6 Weeks. If product is in stock shipping time will be around 3-7 days.
Fire Pit Art:
Fire Pit Art products are made to order and current manufacturing time is 3-12 days. All Fire Pit Art® creations are made to order. After placing your order they start creating your pieces. All fire pits are shipped LTL departing from Lebanon, TN. Your piece will be delivered LTL residential-curbside delivery. The dispatcher from the freight company will call to schedule your residential curb-side delivery offering a 4 hour delivery window typically.
White glove service is available in most metropolitan area's. If white glove service is required we will need to quote those additional costs for you. Refunds:
Gas components are not eligible for buyers remorse refund if they have been installed or used.
Once payment is taken, any modified and / or powder coated pieces are considered custom work and not eligible for refund.
Sierra Flame:
In stock - Lead Time in Business Day Hours is 3-5 days.
Out of stock - It is best to contact us on the green "chat" button at the bottom. Some of Sierra Flame producs are Special Order item, once order is placed, your order becomes final, non-cancelable, and non-returnable.
Vinnova Design:
All orders are processed within on business days, 24hours from order. Actual shipping time is contingent upon availability of merchandise and credit verification by our Credit and Fraud Protection Department. To provide a worry free shopping experience. Orders are shipped 48 hours (UPS Items) after being received. If product is in stock shipping time will be around 3-7 days.
Check Vinnova Return Policy HERE
For information about all other brands not mentioned here please contact us on the green "chat" button at the bottom or call us at (307) 459-1340
1. When it comes to customer support, Point Design sets the premium standard. We are dedicated to delivering not only the finest products but also an unmatched customer and user experience.
2. At Point Design, we guarantee delivery of products priced at $1000 or more within seven days to the 48 contiguous states. If your product doesn't arrive on time, we'll provide you with a $50 gift card for your next purchase. Your satisfaction is our commitment.
3. We're committed to providing you with Exclusive Online Discounts while maintaining MAP (Minimum Advertised Prices). Rest easy when you shop with us.
4. We exclusively utilize Shopify Payments and Shop Pay, allowing you to make purchases and conveniently spread payments over four installments. This ensures a 100% secure checkout experience while providing you with flexible payment options. Your funds are in safe hands with Point Design.
5. Founded in early 2021, our company specializes in offering high-end lighting, furniture, and bath essentials that have undergone rigorous quality testing. Through our partnerships with over 50+ industry-leading brands, we've established a significant presence in some of the most luxurious households throughout North America.
We might not be architects, but our free 3D design services (a $300 value) will help you plan and envision an outdoor kitchen customized to fit your space. After approving the final design, your design expert can assist in placing the order for your selected home goods. If you’re working with a contractor, give them our 3D design to confirm that your space can fit the design. The process is easy! After all, who doesn’t like free, beautiful visual aids? The product has to be priced at least $200. All of the following information is required:
- Which product do you want?
- Dimensions of your space
- Your idea
- and all the important information you want to emphasize
- What is the size and shape of the area where you want this built?
When you send an inquiry, customer support will contact you with details.
Sent an inquiry via the link at the bottom of this page called "Free 3D Product Simulation" in the Other section.
HAVE A QUESTION?
0
Hours in a Week Available Customer Support
0
Days Shipping Time (1000+ Products) or Gift Card
0
Units Delivered Today Alone
What other people think about our service:
